Easy Install, Safer Tuning.

Takes about 10 min to Install.

Link to official example install >

No special tools are required for this easy process. Remove at any time.

Prepare the Vehicle

  • Open the hood, close and lock doors.
  • Wait 10 minutes before proceeding to ensure all systems are off.
  • For "Keyless Go" vehicles, keep the key at least 50 feet away.
  • If there’s an alarm system, disable it before starting.

Remove the Engine Cover

  • Carefully remove any engine covers (not common), which may require loosening screws.
  • Set aside for reinstallation later.

Connect to the Turbo Boost Sensor

  • Locate the turbo boost pressure sensor in the engine bay.
  • Disconnect the sensor plug, then connect the RaceChip harness to both the sensor and the disconnected plug.

Connect to the Manifold Pressure Sensor

  • Locate and disconnect the manifold absolute pressure sensor.
  • Attach the RaceChip harness to the sensor and disconnected plug.

Connect the RaceChip & Perform Initial Function Test

  • Position the RaceChip safely, then turn on the ignition (do not start the engine).
  • Verify that dashboard lights and the RaceChip power light behave normally.
  • Start the engine and ensure it idles smoothly.

Secure RaceChip & Wiring Harness

  • Position the RaceChip securely using the included clips and cable ties.
  • Ensure there’s no excessive tension on the wiring.

Finalizing Installation

  • Reattach the engine cover and close the bonnet.
  • Take a test drive to verify functionality.
Unlock Performance in Just 10 Minutes

Installation Tips For RaceChip

Optimizing your vehicle’s performance and safeguarding engine health depends on the right setup. With RaceChip, installation is quick and simple, typically taking just 10 minutes. You’ll be on the road in no time, thanks to a user-friendly, plug-and-play system.

Why Choose RaceChip's Plug & Play?

RaceChip’s installation process is designed for ease, requiring no special tools. It fits seamlessly between your engine’s controls and sensors, offering real-time adjustments for power without compromising factory settings. Best of all, RaceChip is reversible, making it easy to remove for trade-in or resale.

Installation takes around 10 minutes, followed by 10 minutes to sync with the RaceChip app. Enjoy simple setup, quick performance boosts, and peace of mind with built-in safety features.

High-Level Installation Steps

  • Open the vehicle hood, close and lock the doors, and wait 10 minutes to allow systems to power down.
  • Remove the engine cover (not common) using a trim pry tool if needed.
  • Locate and connect the RaceChip to the turbo boost and manifold sensors.
  • Perform a quick ignition test without starting the engine, then secure RaceChip and wiring.
  • Enjoy easy removal and factory reset options for complete flexibility.

Why Installation Is Quick & Reversible

With RaceChip, there’s no need for permanent changes. The plug-and-play system allows for easy setup and removal, preserving vehicle integrity and making it simple to revert to factory settings at any time. This design is ideal for those who want a boost in power without compromising warranty or resale value.

Engine Safety Built In

  • Built-in safety mechanisms protect your engine during performance tuning.
  • Automatic reset options allow you to revert to factory settings instantly.
  • Non-invasive setup ensures engine components remain untouched.

For detailed steps and troubleshooting tips, refer to the full installation PDF or watch the video tutorials. RaceChip’s customer support is also ready to assist with any installation questions.